Technical assistance
We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.
Last questions:
The unit on which the Titane hinged column is installed requires at least 4 hinges for the column to work properly.To this end, we recommend installing the column with soft-close hinges X91 or X92.
If it is mounted in the option with mechanised door, the distance is 10mm.
The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043. The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.
Concept 30 kg exterior drawer height 105 mm
Concept 30 kg exterior drawer height 185 mm
Concept 30 kg exterior drawer height 138 mm
Concept 50 kg exterior drawer height 105 mm
Concept 50 kg exterior drawer height 138 mm
Concept metal sides height 105 mm RIGHT
Concept metal sides height 105 mm LEFT
Concept metal sides height 138 mm RIGHT
Concept metal sides height 138 mm LEFT
This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.
This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
Yes, it is possible to recharge the Kaus light with a mobile phone charger. The charger needs to have a type C micro USB and should at least supply 5V DC 1A.