|Finishings||Transparent / not defined|
|Efficiency||49 lm / W|
|Lumen||375 lm / m|
|Power||7,6 W / m|
|Color temperature||Natural white 4.000 K|
|Nº of leds||128 LEDs / m|
The minimum hole diameter to be made is 7 mm for the male Miniled connector to go through.If you have a female connector, the hole has to be 9 mm.
Yes, it can be cut every 63 mm.It also shows cutting marks in one of the strip sides, since it has a more transparent area where the darker side shows the cutting areas.Since the strip has cables on the two sides, each strip has to be cut in 2 pieces, to have a cable on each side.If you need additional cuts, the waste can be used connecting the strip with the 8 mm Lynx Q or the Lynx H cable or by welding the strip.