You are going to delete this cart. Are you sure?
In order to fit a recessed or built-in handle onto a drawer or on a door it is necessary to carry out prior machining and in some cases you can avail of a drill.
In the event that it is circular, you will find cutters for use with a drill, therefore you will not need as a specific a tool as a milling machine. You will easily find different different diameters, therefore it is necessary to focus on the mounting diameter and you will have to see if the recessed handle has enough overhang in order to cover up possible marks that may be produced on the edge. In the event that there is very little overhang and you are afraid that it will be seen, especially with post-formed or melamine, use well-sharpened cutters in order to prevent this situation.
In the case of handles with shapes, it is indeed necessary to use a milling machine and the cutter most appropriate for the embedding to carry out.
Once the handle has been embedded in, the time comes to secure it. Some handles come provided with a little hole in order to be able to screw it at the inner sides and at other times they have holes through them. Another option is to fasten them with a kind of contact adhesive.
Above all, it is important tat you bear in mind the depth to be embedded and the thickness of the door, using a stop in order not to mark the inner side of the door.
Place your orders
24 h | 365 days
The product will be removed from your cart. Are you sure?
This product is already in your cart.
This code does not correspond to any of our products.
Your cart will be emptied. Are you sure?
You are going to delete this client. Are you sure?